Wall-mountedWallbox Cover
Top and side shielding for a charger on a suitable existing wall. A straightforward starting point for a wall-mounted setup.
Nominal sizes: 40 × 40 / 50 × 50 cm. Usable depth to be confirmed.
View product: Wallbox Cover →Your Huawei EV charger: choose a cover or a pedestal
HUAWEI SMART CHARGER · S0
Your Huawei EV charger: choose a cover or a pedestal
A garage wall and a driveway need different solutions. Compare five M2 Work accessories for shelter, cable routing and a dedicated charging position. Start with how you use the space, then check the clearances before choosing your configuration.
What does your charging space need?
Wall-mounted
Wall-mountedCover Plus
A rear technical compartment to accommodate the planned cable and conduit routes, helping tidy the area behind the charger.
Body dimensions in the current product record: 60 × 50 × 26 cm; rear compartment: 6 cm. Usable front clearance to be confirmed.
View product: Cover Plus →
Wall-mountedCrystal Shell
Top and front shielding with open sides. Consider it when the front of the charger needs attention too. A post is not included as standard.
External dimensions: 36 × 45 × 29 cm. Usable internal clearance to be confirmed.
View product: Crystal Shell →
Ground-mountedStand
A freestanding structure with an internal technical compartment, bringing the charging position closer to the vehicle while organising the planned installation.
External dimensions M: 47 × 130 × 32 cm; L: 60 × 140 × 40 cm. Mounting area to be confirmed.
View product: Stand →
Ground-mountedVela
A slim pedestal with an overhead cover, for a dedicated charging position that fits the appearance of your driveway or parking area.
Dimensions and mounting area to be confirmed.
View product: Vela →Accessory dimensions alone do not confirm a fit for the Huawei charger. The covers and supports shown do not include the charger or its electrical installation.
Choose the extra feature you will actually use
With a suitable wall in place, start by comparing Wallbox Cover. Choose the Plus route if you need space behind the charger for planned cable runs. Explore Crystal Shell for front shielding. If there is no wall beside the car, compare Stand and Vela for the technical compartment, appearance and mounting requirements.
Check dimensions, plug clearance and mounting
- Read the full model reference on the charger label. This guide covers SCharger-7KS-S0 and SCharger-22KT-S0; other Huawei models need a separate assessment.
- Allow room to insert and remove the plug, handle the cable and reach the controls. The body depth is only part of the space needed during use.
- Compare the available internal width, height and depth of the cover with the whole installation. External accessory dimensions are not usable clearances.
- For ground mounting, check the mounting plate, fixing pattern, cable entry and suitable anchorage. Overall pedestal size does not confirm the charger will mount correctly.
Manufacturer documents
Common questions
Is Crystal Shell confirmed to fit my Huawei charger?
Not from the model name alone. Usable internal clearance, plug access and fixings must be checked. The external dimensions of the cover are not enough to confirm compatibility.
How does Cover Plus differ from Wallbox Cover?
Wallbox Cover provides top and side shielding. Cover Plus adds a rear technical compartment for planned cable routes. This compartment is not an electrical distribution enclosure.
Will a cover increase charging speed?
No. Charging power and software features belong to the charger. An accessory provides shielding, support or organisation; it does not upgrade charging performance.
Can I add a cover to an existing charger?
An existing installation can be assessed for an accessory. Check the available space, wall and cable route first. Changes to mounting or electrical connections need appropriate professional planning.
Does the cover make the charger waterproof?
No. Crystal Shell has open sides. Additional shielding does not make the charger waterproof or replace the manufacturer’s installation requirements.
Designed and manufactured in Italy by M2 Work. The VoltaCover range is sold and supported here by Box Air Klima.