Wall-mountedWallbox Cover
Top and side shielding for a charger on a suitable existing wall. A straightforward starting point for a wall-mounted setup.
Nominal sizes: 40 × 40 / 50 × 50 cm. Usable depth to be confirmed.
View product: Wallbox Cover →Covers and pedestals for your Wallbox EV charger
Covers and pedestals for your Wallbox EV charger
Check the model code, plug access, cable routing, usable internal clearance and fixings. The products below are options to assess, not confirmed combinations.
Designed and manufactured in Italy by M2 Work. The VoltaCover range is sold and supported here by Box Air Klima.
What does your charging space need?
Wall-mounted
Wall-mountedCover Plus
A rear technical compartment to accommodate the planned cable and conduit routes, helping tidy the area behind the charger.
Body dimensions in the current product record: 60 × 50 × 26 cm; rear compartment: 6 cm. Usable front clearance to be confirmed.
View product: Cover Plus →
Wall-mountedCrystal Shell
Top and front shielding with open sides. Consider it when the front of the charger needs attention too. A post is not included as standard.
External dimensions: 36 × 45 × 29 cm. Usable internal clearance to be confirmed.
View product: Crystal Shell →
Ground-mountedStand
A freestanding structure with an internal technical compartment, bringing the charging position closer to the vehicle while organising the planned installation.
External dimensions M: 47 × 130 × 32 cm; L: 60 × 140 × 40 cm. Mounting area to be confirmed.
View product: Stand →
Ground-mountedVela
A slim pedestal with an overhead cover, for a dedicated charging position that fits the appearance of your driveway or parking area.
Dimensions and mounting area to be confirmed.
View product: Vela →Tethered and socketed Pulsar units have different bodies. The Pro figures refer to the 2025 version. For the socketed unit, the installation guide recommends 500 mm on each side to facilitate installation. Keep the screen, RFID area, socket and cable accessible.
Accessory dimensions alone do not confirm a fit for the Wallbox charger. The covers and supports shown do not include the charger or its electrical installation.
Choose the extra feature you will actually use
With a suitable wall in place, start by comparing Wallbox Cover. Choose the Plus route if you need space behind the charger for planned cable runs. Explore Crystal Shell for front shielding. If there is no wall beside the car, compare Stand and Vela for the technical compartment, appearance and mounting requirements.
Manufacturer documents (original language)
Common questions
Is Crystal Shell confirmed to fit my Wallbox charger?
Not from the model name alone. Usable internal clearance, plug access and fixings must be checked. The external dimensions of the cover are not enough to confirm compatibility.
How does Cover Plus differ from Wallbox Cover?
Wallbox Cover provides top and side shielding. Cover Plus adds a rear technical compartment for planned cable routes. This compartment is not an electrical distribution enclosure.
Will a cover increase charging speed?
No. Charging power and software features belong to the charger. An accessory provides shielding, support or organisation; it does not upgrade charging performance.
Can I add a cover to an existing charger?
An existing installation can be assessed for an accessory. Check the available space, wall and cable route first. Changes to mounting or electrical connections need appropriate professional planning.
Does the cover make the charger waterproof?
No. Crystal Shell has open sides. Additional shielding does not make the charger waterproof or replace the manufacturer’s installation requirements.