Crystal Shell 360: protection, cable storage and plug holder
Protect the wallbox. Store the cable. Give the connector its own place.
Designed by the M2 Work VoltaCover design centre, the 360 family brings three needs together in a coordinated structure: wallbox shielding, manual cable storage and a plug holder.
Discover Crystal Shell 360 · Discover Station 360
Protection is the starting point
Crystal Shell remains at the centre: a top and front polycarbonate screen with open sides for access and natural ventilation. The module adds a stainless-steel plate for organising the cable and connector. Protection applies to the shielded surfaces: the system remains open and does not change the wallbox IP rating.
Choose the configuration
| Configuration | What it includes | Where it is installed |
|---|---|---|
| Crystal Shell 360 | Crystal Shell + stainless-steel plate with cable and plug holders | Wall or compatible support; pedestal not included |
| Crystal Shell Station 360 | Crystal Shell 360 + pedestal with internal cable routes | Freestanding, on a suitable base and anchors |
| Cable Dock 360 · in preparation | Stainless-steel plate with cable and plug holders, without Crystal Shell | Wall or compatible pedestal |
| Pole 360 · in preparation | Separate pedestal, without the upper module | For Crystal Shell 360 or Cable Dock 360 |
Vertical or horizontal: the module adapts
The upper module can be prepared vertically or rotated 90° for horizontally developed wallboxes, after checking clearances, fixing points and connector access. The pedestal remains vertical: only the module orientation changes, and the wallbox must never be rotated against its manufacturer’s instructions.
Confirmed dimensions
- 600 × 600 mm plate.
- Usable cable-management space: approximately 10 cm.
- Station 360: 130 cm high freestanding pedestal.
About five metres of cable, stored manually
The structure is designed to hold approximately five metres of charging cable around the module and to store the plug in the holder. Actual capacity depends on cable diameter, stiffness and bending radius. This is a manual winding support without automatic retraction; during charging, arrange the cable according to its manufacturer’s instructions.
Before or after installation
Dedicated routes make it possible to plan cables and connections for a new installation or for an existing wallbox. In the Station version, the hollow pedestal carries the wiring towards the upper module. The installer must specify the base, anchors and connections for the site.
Also available without the Crystal Shell screen
The modular design separates cable organisation from the cover. Cable Dock 360 and Pole 360 are separate components currently being prepared for the catalogue. Cable Dock 360 + Pole 360 creates a freestanding support for the cable and connector without the Crystal Shell front screen. Prices and contents for the separate components will be stated in their product sheets before sales open.
Before ordering
Check the wallbox, inserted plug, cable bends, controls and required clearances. Confirm that the plug holder is compatible with the connector. The wallbox, charging cable and connector are not included with the complete systems.
Discover Crystal Shell 360 · Discover Station 360 · All wallbox protection
Evening lighting as a service accessory
The 360 family can also be prepared for a local light in the charging area, useful when you arrive home after dark and need to handle the cable and connector.
The sensor LED lamp is separate, supplied by a third party, not included and not certified by M2 Work / Box Air Klima.