Crystal Shell Station 360 – Wallbox pedestal with cover and cable holder
START FROM THE NEED
Do you want a complete charging point next to the parking space without using a wall?
Station 360 combines wallbox protection, cable management, a plug holder and a freestanding pedestal in one charging point. It is the 360 solution for installations independent of a wall.
If you need a more technical structure with an internal compartment, compare Stand.
Designed and made in Italy by M2 Work. The wallbox is not included; compatibility must be checked against the actual model and installation.
CRYSTAL SHELL STATION 360
The freestanding station that protects and organises the entire charging point.
Crystal Shell Station 360 turns Crystal Shell technology into a freestanding charging point fixed to the ground. The wallbox, cable and connector come together in one tidy, technically and architecturally functional element.
The structure in visible satin stainless steel, with a uniform grey finish, integrates wallbox protection, cable storage and the connector holder. The pedestal provides internal cable routing, avoiding untidy connections or exposed technical components.
A new architecture for charging
- Freestanding position: floor installation without requiring a wall.
- Protected wallbox: Crystal Shell shielding integrated into the upper module.
- Stored cable: the cable is arranged neatly around the module.
- Integrated plug holder: the connector has a dedicated place when not in use.
- Internal routes: the pedestal accommodates the necessary wiring.
- Satin stainless steel: a durable, technical and contemporary structure.
One module, two orientations
The upper module can be installed vertically or rotated 90°. After confirming compatibility, the same structure can therefore accommodate wallboxes with a horizontal or transverse layout.
Technical data
- External module dimensions: 66 × 75 × 29 cm.
- Pedestal height: 130 cm.
- System weight: 12.5 kg.
- Material: visible satin stainless steel.
- Finish: uniform grey.
- Installation: ground fixing.
- Orientation: vertical or rotated 90°.
Wallbox, charging cable and connector are not included. Compatibility must be checked before ordering. Fixing and connections must be sized and completed by qualified personnel according to the site and wallbox manufacturer’s requirements.
Crystal Shell Station 360: tidy outside, technology inside.
Vertical or horizontal: the module adapts
The upper module can be prepared vertically or rotated 90° for horizontally developed wallboxes, after checking clearances, fixing points and connector access. The pedestal remains vertical: only the module orientation changes, and the wallbox must never be rotated against its manufacturer’s instructions.
About five metres of cable, stored manually
The structure is designed to hold approximately five metres of charging cable around the module and to store the plug in the holder. Actual capacity depends on cable diameter, stiffness and bend radius. This is a manual winding support without automatic retraction; during charging, arrange the cable according to its manufacturer’s instructions.
Before or after installation
Dedicated routes make it possible to plan cables and connections for a new installation or an existing wallbox. In the Station version, the hollow pedestal carries the wiring towards the upper module. The installer must specify the base, fixings and connections for the site.
A modular system by VoltaCover
Designed by the M2 Work VoltaCover design centre, the 360 family brings three needs together in a coordinated structure: wallbox shielding, manual cable storage and a plug holder.
Station 360 combines Crystal Shell 360 with the freestanding pedestal. Separate Cable Dock 360 and Pole 360 components are being prepared for the catalogue.
Do you have an SMA wallbox?
EV Charger 7.4/22 and eCharger require different checks. Check the dimensions, mounting clearances and SMA fit before choosing the configuration. Mentioning the brand does not confirm compatibility.
Evening lighting: you arrive home and the charging area is visible
This model can be prepared for a local service light in the wallbox area. The goal is to make everyday use easier when you arrive home in the evening: see the connector, cable and connection point without looking for a switch or using your phone as a torch.
The preparation concerns the VoltaCover structure. The sensor LED lamp is a separate third-party component. It is not included and is not manufactured, sold or certified by M2 Work / Box Air Klima.